Pulp mixer with reasonable structure and sufficient strength

It is well known that the structure of the slurry agitator equipment should conform to some rules. For example, the mixing equipment should have a reasonable structure and sufficient strength, so as to more effectively exert the value of the mixing equipment in the enterprise, and some structural aspects of the mixing equipment. The knowledge is now compiled for you to analyze the relevant knowledge.

The slurry agitator equipment should have reasonable structure and sufficient strength. It is preferred to know that the so-called reasonable structure is not only reasonable in terms of the geometry and installation position of the blade, but mainly refers to the following principles: The manufacturing process is reasonable. The connection method of the blade and the mixing season is stable and reliable, and the installation and maintenance of the blade is convenient. In addition to the difficult machining of special shapes such as propulsion and ribbon, most of the blade shapes and processing are relatively simple.

The slurry agitator should be especially careful when feeding. The empty tank heating material or the hot tank should be avoided as much as possible. The excessive temperature difference impact has certain influence on the performance of the enamel, and it should be ensured that no hard solid objects will be transferred. In the kettle, if it is not necessary to add a large piece of hard material, it should be crushed and added. During the operation of the agitator, it should be noted that when the device is heated by the jacket, the temperature is gradually increased. It is necessary to pre-pass the pressure of 0.1MP, keep it for a quarter of an hour, and then slowly introduce steam into the operating pressure.